Verilog: Dual Seven Segment Display Driver

This is an expansion upon my SevenSegmentDisplayDriver module which will allow you to drive a dual seven segment display, specifically the add-on for the Spartan 3E but it should be quite easy to modify for other FPGA’s. The basic premise of this module is you have a dual seven segment display which activates the left [...]

Filed under: Code, FPGA, Verilog by Daniel
2 Comments »

State Machine for the Spartan 3E Knob

The following code is a simple state machine that determines the direction that the knob on the Spartan 3E is turning and outputs a clock signal (Count) as it turns. A & B are the inputs from the encoders on the knob, RST & CLK are the reset and clock obviously. Count is the clock [...]

Filed under: Code, FPGA, VHDL by Daniel
2 Comments »