Verilog: Dual Seven Segment Display Driver

This is an expansion upon my SevenSegmentDisplayDriver module which will allow you to drive a dual seven segment display, specifically the add-on for the Spartan 3E but it should be quite easy to modify for other FPGA’s. The basic premise of this module is you have a dual seven segment display which activates the left [...]

Filed under: Computers, Hardware, Programming, Software by Daniel
2 Comments »

Verilog: Seven Segment Display Decoder

This code will take a four bit number and decode it into the seven individual segments to drive a seven segment display. nIn is the four bit number to be decoded and ssOut is the array of segments for the display going from a, being the LSB, to g being the MSB.

Filed under: Computers, Programming, Software by Daniel
2 Comments »

Verilog: n-Bit Adder

This is code is for an simple asynchronous wrapping n-bit adder. By changing the value of n you can make it a 2, 4, … bit adder where n = <number of bits> – 1. f is the output register that will have the current value of the counter, cOut is the carry output. a [...]

Filed under: Computers, Programming, Software by Daniel
1 Comment »

State Machine for the Spartan 3E Knob

The following code is a simple state machine that determines the direction that the knob on the Spartan 3E is turning and outputs a clock signal (Count) as it turns. A & B are the inputs from the encoders on the knob, RST & CLK are the reset and clock obviously. Count is the clock [...]

Filed under: Computers, Hardware, Programming, Software by Daniel
No Comments »