<?xml version="1.0" encoding="UTF-8"?><rss version="0.92">
<channel>
	<title>Death by Logic</title>
	<link>http://www.deathbylogic.com</link>
	<description>Computers - Software - Electronics</description>
	<lastBuildDate>Tue, 31 Aug 2010 05:26:14 +0000</lastBuildDate>
	<docs>http://backend.userland.com/rss092</docs>
	<language>en</language>
	<!-- generator="WordPress/3.0.1" -->

	<item>
		<title>Announcing the &#8216;Shutter Pod&#8217; project</title>
		<description><![CDATA[The goal of the project is to design a timer for SLR cameras capable of taking long exposure and time lapse photography. At the heart of the  device will be a ATmega micro-controller and a 16&#215;2 back lite LCD display. The entire project is being developed as open-source hardware and software being hosted on Google [...]]]></description>
		<link>http://www.deathbylogic.com/?p=82</link>
			</item>
	<item>
		<title>BJT Equation Sheet</title>
		<description><![CDATA[This is a handy little cheat sheet that I have been working on with equations for common Bi-Junction Transistor (BJT) configurations. It has schematics, DC equations and AC equations for 8 of the most common setups. It  is not quite finished yet but it&#8217;s a start so if you find any mistakes or know of [...]]]></description>
		<link>http://www.deathbylogic.com/?p=77</link>
			</item>
	<item>
		<title>Notes on using the Robotics Connection I2C line following sensor with Arduino based boards</title>
		<description><![CDATA[After many of wasted hours of trying to get the I2C line following sensor from Robotics Connection working with an Arduino based controller board I was finally able to get it to communicate and since there was no other information out there on this issue I decided to write this post. To start off the [...]]]></description>
		<link>http://www.deathbylogic.com/?p=61</link>
			</item>
	<item>
		<title>Verilog: n-Bit Up Counter</title>
		<description><![CDATA[This is a simple n-bit wrapping up counter. The n parameter can be changed to make this 4, 8, &#8230; bit counter were n = &#60;number of bits&#62; &#8211; 1. The CLK signal can be any signal you want and will increment the value of the counter on the positive edge of a pulse, RST [...]]]></description>
		<link>http://www.deathbylogic.com/?p=45</link>
			</item>
	<item>
		<title>Verilog: Dual Seven Segment Display Driver</title>
		<description><![CDATA[This is an expansion upon my SevenSegmentDisplayDriver module which will allow you to drive a dual seven segment display, specifically the add-on for the Spartan 3E but it should be quite easy to modify for other FPGA&#8217;s. The basic premise of this module is you have a dual seven segment display which activates the left [...]]]></description>
		<link>http://www.deathbylogic.com/?p=53</link>
			</item>
	<item>
		<title>Verilog: Seven Segment Display Decoder</title>
		<description><![CDATA[This code will take a four bit number and decode it into the seven individual segments to drive a seven segment display. nIn is the four bit number to be decoded and ssOut is the array of segments for the display going from a, being the LSB, to g being the MSB. module SevenSegmentDisplayDecoder(ssOut, nIn); [...]]]></description>
		<link>http://www.deathbylogic.com/?p=47</link>
			</item>
	<item>
		<title>Verilog: n-Bit Adder</title>
		<description><![CDATA[This is code is for an simple asynchronous wrapping n-bit adder. By changing the value of n you can make it a 2, 4, &#8230; bit adder where n = &#60;number of bits&#62; &#8211; 1. f is the output register that will have the current value of the counter, cOut is the carry output. a [...]]]></description>
		<link>http://www.deathbylogic.com/?p=37</link>
			</item>
	<item>
		<title>State Machine for the Spartan 3E Knob</title>
		<description><![CDATA[The following code is a simple state machine that determines the direction that the knob on the Spartan 3E is turning and outputs a clock signal (Count) as it turns. A &#38; B are the inputs from the encoders on the knob, RST &#38; CLK are the reset and clock obviously. Count is the clock [...]]]></description>
		<link>http://www.deathbylogic.com/?p=17</link>
			</item>
	<item>
		<title>Re-Mastering RiffTrax to DVD</title>
		<description><![CDATA[After being a fan of MST3K for many years I was sad to see it go, but was able to entertain myself on DVDs of old episodes for awhile. So naturally I was thrilled I learned about RiffTrax and that most of the cast got back together and that they would finally be able to [...]]]></description>
		<link>http://www.deathbylogic.com/?p=9</link>
			</item>
</channel>
</rss>
